2001 Ford Escort Cylinder Head Disassembly
download 1. Remove the bolt and the camshaft position (CMP) sensor. 2. Remove the bolts, the rocker arm seats, and the rocker arms. 2. Remove the bolts, the rocker arm seats, and the rocker arms. 3....
View Article1998 Ford Expedition Main Control Valve Body Removal Installation
download 1. If equipped, turn the air suspension switch OFF. 2. Disconnect battery ground cable. 3. Raise and support the vehicle; refer to Section 100-02. 4. Drain transmission fluid and remove the...
View Article2001 Chevrolet Cavalier Idle Air Control Motor (IAC): Service and Repair...
download 1. Remove the idle air control (IAC) valve connector. 2. Remove the IAC valve attaching screws (1). NOTE: If the IAC valve has been in service: DO NOT push or pull on the IAC valve pintle. The...
View Article2003 Buick Rendezvous CX DIFFERENTIAL CLUTCH PUMP CHECK VALVE Removal...
download Removal Drain the differential lubricant. See LUBRICATION . Disconnect the clutch pump check valve electrical connector. Remove the clutch pump check valve mounting bolts. See Fig. 1 . Remove...
View Article2004 Ford F-150 Main Control Valve Body Disassembled View
download 1. Remove the torque converter clutch (TCC) solenoid and the shift solenoid. 1. Remove the retaining bolt. 2. Remove the shift solenoid. 3. Remove the TCC solenoid. 2. Remove the 2...
View ArticleENGINE MISFIRE 2003-2004 Mustang, 1999-2004 Navigator 2002-2003 Blackwood...
download Some 1999-2004 Navigator, 2002-2003 Blackwood, 2003-2005 Aviator, 2003-2004 Marauder and 2003-2004 Mustang vehicles built before 12/19/2004 equipped with 4.6L 4V/5.4 4V engine may exhibit a...
View Article1995 Ford Windstar VALVE CLEARANCE ADJUSTMENT
download NOTE: Hydraulic valve lifters are used; no valve adjustment is required. When valve and/or valve seat is machined, valve clearance is reduced and may cause improper valve operation. Different...
View Article1992 Suzuki Swift VALVE CLEARANCE ADJUSTMENT
download NOTE: Samurai & Sidekick 1) Remove rocker cover. Rotate crankshaft until zero degree (TDC) timing mark of timing belt cover is in line with timing mark on crankshaft pulley. 2) Cylinder...
View Article1996 Ford Taurus valve body Removal and Installation
download REMOVAL NOTE: The oil pump and valve body are removed as an assembly. 1. Disconnect battery ground cable, then remove battery, battery tray, and remote air cleaner. 2. Position supply hoses,...
View Article1995 Ford Windstar Engine Front Cover REMOVAL AND INSTALLATION
download Engine Front Cover If the engine front cover (6019) is being removed to check timing chain deflection, refer to Timing Chain Deflection Procedure as outlined in Section 03-00. SPECIAL SERVICE...
View Article
